Danfoss VLT AutomationDrive FC 301 Programming Manual page 566

VLT AutomationDrive FC 301/302
Programming Guide
Option
[126]
[127]
[130]
[131]
[132]
[140]
[141]
[145]
[150]
[160]
[170]
[171]
[172]
[173]
[176]
[177]
[178]
[180]
Parameter 24-03 Emergency Mode Min Reference
Table 1040: Parameter 24-03 Emergency Mode Min Reference
24-03 Emergency Mode Min Reference
Default value: Size related
Conversion index: -3
Minimum value to the reference/setpoint (limiting the sum of values in parameter 24-05 Emergency Mode Preset Reference and value
of signal on input selected in parameter 24-06 Emergency Mode Reference Source). If running in open loop when emergency mode is
active, the unit is selected by the setting parameter 0-02 Motor Speed Unit. For closed loop, select the unit in parameter 24-02 Emer-
gency Mode Unit.
Parameter 24-04 Emergency Mode Max Reference
Table 1041: Parameter 24-04 Emergency Mode Max Reference
24-04 Emergency Mode Max Reference
Default value: Size related
Conversion index: -3
566 | Danfoss A/S © 2022.12
Name
3
ft /min
3
ft /h
lb/s
lb/min
lb/h
ft/s
ft/min
ft
lb ft
°F
psi
2
lb/in
in WG
ft WG
kpsi
MPa
kBar
HP
Parameter type: Range, -999999.999 - par. 24-04 EmergencyMode-
MaxReference
Data type: Int32
Parameter type: Range, par. 24-03 - 999999.999 EmergencyMode-
MinReference
Data type: Int32
Parameter Descriptions
Description
Setup: All setups
Change during operation: True
Setup: All setups
Change during operation: True
AU275636650261en-000101 / 130R0334