Danfoss VLT AutomationDrive FC 301 Programming Manual page 368

VLT AutomationDrive FC 301/302
Programming Guide
Parameter 12-81 HTTP Server
Table 654: Parameter 12-81 HTTP Server
12-81 HTTP Server
Default value: [0] Disabled
Conversion index: –
Enables/disables the built-in HTTP (web) server.
Option
[0]*
[1]
Parameter 12-82 SMTP Service
Table 655: Parameter 12-82 SMTP Service
12-82 SMTP Service
Default value: [0] Disabled
Conversion index: –
Enables/disables the built-in SMTP (e-mail) service on the option.
Option
[0]*
[1]
Parameter 12-83 SNMP Agent
Table 656: Parameter 12-83 SNMP Agent
12-83 SNMP Agent
Default value: [1] Enabled
Conversion index: –
Use this parameter to either enable or disable the SNMP agent.
Option
[0]
[1]*
Parameter 12-84 Address Conflict Detection
Table 657: Parameter 12-84 Address Conflict Detection
12-84 Address Conflict Detection
Default value: [1] Enabled
Conversion index: –
Use this parameter to detect and resolve IP address conflict.
368 | Danfoss A/S © 2022.12
Parameter type: Option
Data type: Uint8
Name
Disabled
Enabled
Parameter type: Option
Data type: Uint8
Name
Disabled
Enabled
Parameter type: Option
Data type: Uint8
Name
Disabled
Enabled
Parameter type: Option
Data type: Uint8
Parameter Descriptions
Setup: 2 setups
Change during operation: True
Description
Setup: 2 setups
Change during operation: True
Description
Setup: 2 setups
Change during operation: True
Description
Setup: 2 setups
Change during operation: True
AU275636650261en-000101 / 130R0334