Danfoss VLT AutomationDrive FC 301 Programming Manual page 489

VLT AutomationDrive FC 301/302
Programming Guide
View the fault code and look up its meaning in
Parameter 15-31 Fault Log: Value
Table 782: Parameter 15-31 Fault Log: Value
15-31 Fault Log: Value
Default value: 0
Conversion index: 0
View an extra description of the error. This parameter is mostly used with alarm 38, internal fault.
Parameter 15-32 Fault Log: Time
Table 783: Parameter 15-32 Fault Log: Time
15-32 Fault Log: Time
Default Value: 0 s Parameter Type: Range, 0 - 2147483647, Array [10]
Conversion Index: 0 Data Type: Uint32
View the time when the logged event occurred. Time is measured in s from start-up of the drive.
Parameter 15-33 Fault Log: Date and Time
Table 784: Parameter 15-33 Fault Log: Date and Time
15-33 Fault Log: Date and Time
Default value: Size related
Conversion index: 0
Array parameter; Date & Time 0–9: This parameter shows when the logged event occurred.
5.15.10 15-4* Drive Identification
The following parameter is only available in FC 302:
-
Parameter 15-58 Smart Setup Filename
Parameters containing read-only information about the hardware and software configuration of the drive.
Parameter 15-40 FC Type
Table 785: Parameter 15-40 FC Type
15-40 FC Type
Default value: 0
Conversion index: 0
View the drive type. The readout is identical to the drive power field of the type code definition, characters 1–6.
Parameter 15-41 Power Section
Table 786: Parameter 15-41 Power Section
15-41 Power Section
Default value: 0
Conversion index: 0
Danfoss A/S © 2022.12
7 Troubleshooting.
Parameter type: Range, -32767 - 32767, Array [10]
Data type: Uint16
Parameter type: Range, 0 - 0, Array [10]
Data type: TimeOfDay
N O T I C E
Parameter type: Range, 0 - 6
Data type: VisStr[6]
Parameter type: Range, 0 - 20
Data type: VisStr[20]
Parameter Descriptions
Setup: All setups
Change during operation: False
Setup: All setups
Change during operation: False
Setup: All setups
Change during operation: False
Setup: All setups
Change during operation: False
Setup: All setups
Change during operation: False
AU275636650261en-000101 / 130R0334 | 489