Danfoss VLT AutomationDrive FC 301 Programming Manual page 467

VLT AutomationDrive FC 301/302
Programming Guide
Option
[1]
[4]
[7]
[10]
[13]
[255]*
Parameter 14-48 PROFIEnergy Desired State
Table 739: Parameter 14-48 PROFIEnergy Desired State
14-48 PROFIEnergy Desired State
Default value: [255] Ready to operate
Conversion index: -
Option
[1]
[4]
[7]
[10]
[13]
[255]*
Parameter 14-49 PROFIEnergy Info
Table 740: Parameter 14-49 PROFIEnergy Info
14-49 PROFIEnergy Info
Default value: 0
Conversion index: 0
Read-out information about PROFIEnergy.
5.14.6 14-5* Environment
AMA and Motor Filters
The following table details the recommended AMA options when motor filters are connected between drive and motor. AMA is
independent of the selection made in parameter 1-00 Configuration Mode and parameter 1-01 Motor Control Principle.
Danfoss A/S © 2022.12
Name
LCP off
Internal fan off
Gatedrive off
Mains off
External fan off
Ready to operate
Parameter type: Option
Data type: Uint8
Name
LCP off
Internal fan off
Gatedrive off
Mains off
External fan off
Ready to operate
Parameter type: Range, 0 - 0x7ffffff, Array [115]
Data type: Uint32
Parameter Descriptions
Description
Setup: 2 setups
Change during operation: False
Description
Setup: All setups
Change during operation: True
AU275636650261en-000101 / 130R0334 | 467