Danfoss VLT AutomationDrive FC 301 Programming Manual page 481

VLT AutomationDrive FC 301/302
Programming Guide
Option Name
[1690] Alarm word
[1692] Warning word
[1694] Ext. status word
[1695] Ext. status word 2
[1697] Alarm word 3
[1698] Warning word 3
[1820] Commanded position
[1821] Master position
[1823] Virtual master pos.
[1827] Safe opt. est. speed
[1828] Safe opt. meas. speed
[1829] Safe opt. speed error
[1840] Analog input X49/1
[1841] Analog input X49/3
[1842] Analog input X49/5
[1843] Analog out X49/7
[1844] Analog out X49/9
[1845] Analog out X49/11
[1846] X49 digital output [bin]
[1860] Digital input 2
[1899] Speed PID torque FF. [Nm]
[3110] Bypass status word
[3466] SPI error counter
[3470] MCO alarm word 1
[3471] MCO alarm word 2
Parameter 15-11 Logging Interval
Table 770: Parameter 15-11 Logging Interval
15-11 Logging Interval
Default value: Size related
Conversion index: -3
Enter the interval in ms between each sampling of the variables to be logged.
Danfoss A/S © 2022.12
Description
Parameter type: Range, 0.000 - 0.000, Array [4]
Data type: Time diff wo DateID [4]
Parameter Descriptions
Setup: 2 setups
Change during operation: True
AU275636650261en-000101 / 130R0334 | 481