Danfoss VLT AutomationDrive FC 301 Programming Manual page 340

VLT AutomationDrive FC 301/302
Programming Guide
Parameter 10-34 DeviceNet Product Code
Table 600: Parameter 10-34 DeviceNet Product Code
10-34 DeviceNet Product Code
Default value: Size related
Conversion index: 0
Use this parameter for reading out the actual DeviceNet product code.
Parameter 10-39 Devicenet F Parameters
Table 601: Parameter 10-39 Devicenet F Parameters
10-39 Devicenet F Parameters
Default value: 0
Conversion index: 0
Use this parameter to configure the drive via DeviceNet and build the EDS file.
5.11.5 10-5* CANopen
Parameter 10-50 Process Data Config Write
Table 602: Parameter 10-50 Process Data Config Write
10-50 Process Data Config Write
Default value: Size related
Conversion index: –
Only elements [2] and [3] of this array can be selected. [0] and [1] are fixed.
Option Name
[-] None
[109] Mode of operation
[302] Minimum reference
[303] Maximum reference
[312] Catch up/slow down value
[321] Touch target
[322] Master scale numerator
[323] Master scale denominator
[326] Master Offset
[328] Master offset speed ref
[341] Ramp 1 ramp up time
[342] Ramp 1 ramp down time
[351] Ramp 2 ramp up time
[352] Ramp 2 ramp down time
340 | Danfoss A/S © 2022.12
Parameter type: Range, 0 - 65535
Data type: Uint16
Parameter type: Range, 0 - 0
Data type: Uint32
Parameter type: Option, Array [81]
Data type: Uint16
Parameter Descriptions
Setup: 1 setup
Change during operation: True
Setup: All setups
Change during operation:
Setup: All setups
Change during operation: True
Description
AU275636650261en-000101 / 130R0334