Danfoss VLT AutomationDrive FC 301 Programming Manual page 325

VLT AutomationDrive FC 301/302
Programming Guide
Option
[0]*
[1]
[2]
[3]
Parameter 9-75 DO Identification
Table 566: Parameter 9-75 DO Identification
9-75 DO Identification
Default value: 0
Conversion index: 0
Provides information about the DO (direct object). This parameter is for PROFINET only.
Parameter 9-80 Defined Parameters (1)
Table 567: Parameter 9-80 Defined Parameters (1)
9-80 Defined Parameters (1)
Default value: 0
Conversion index: 0
This parameter shows a list of all the defined drive parameters available for PROFIBUS.
Parameter 9-81 Defined Parameters (2)
Table 568: Parameter 9-81 Defined Parameters (2)
9-81 Defined Parameters (2)
Default value: 0
Conversion index: 0
This parameter shows a list of all the defined drive parameters available for PROFIBUS.
Parameter 9-82 Defined Parameters (3)
Table 569: Parameter 9-82 Defined Parameters (3)
9-82 Defined Parameters (3)
Default value: 0
Conversion index: 0
This parameter shows a list of all the defined drive parameters available for PROFIBUS.
Parameter 9-83 Defined Parameters (4)
Table 570: Parameter 9-83 Defined Parameters (4)
9-83 Defined Parameters (4)
Default value: 0
Conversion index: 0
This parameter shows a list of all the defined drive parameters available for PROFIBUS.
Danfoss A/S © 2022.12
Name
No action
Power-on reset
Power-on reset prep
Comm option reset
Parameter type: Range, 0 - 65535
Data type: Uint16
Parameter type: Range, 0 - 9999
Data type: Uint16
Parameter type: Range, 0 - 9999
Data type: Uint16
Parameter type: Range, 0 - 9999
Data type: Uint16
Parameter type: Range, 0 - 9999
Data type: Uint16
Parameter Descriptions
Description
Setup: All setups
Change during operation:
Setup: All setups
Change during operation: False
Setup: All setups
Change during operation: False
Setup: All setups
Change during operation: False
Setup: All setups
Change during operation: False
AU275636650261en-000101 / 130R0334 | 325