Danfoss VLT AutomationDrive FC 301 Programming Manual page 482

VLT AutomationDrive FC 301/302
Programming Guide
Parameter 15-12 Trigger Event
Table 771: Parameter 15-12 Trigger Event
15-12 Trigger Event
Default value: [0] False
Conversion index: -
Select the trigger event. When the trigger event occurs, a window is applied to freeze the log. The log then retains a specified per-
centage of samples before the occurrence of the trigger event (parameter 15-14 Samples Before Trigger).
Option Name
[0]* False
[1] True
[2] Running
[3] In range
[4] On reference
[5] Torque limit
[6] Current limit
[7] Out of current range
[8] Below I low
[9] Above I high
[10] Out of speed range
[11] Below speed low
[12] Above speed high
[13] Out of feedb. range
[14] Below feedb. low
[15] Above feedb. high
[16] Thermal warning
[17] Mains out of range
[18] Reversing
[19] Warning
[20] Alarm (trip)
[21] Alarm (trip lock)
[22] Comparator 0
[23] Comparator 1
[24] Comparator 2
[25] Comparator 3
482 | Danfoss A/S © 2022.12
Parameter type: Option
Data type: Uint8
Description
Parameter Descriptions
Setup: 1 setup
Change during operation: True
AU275636650261en-000101 / 130R0334