Danfoss VLT AutomationDrive FC 301 Programming Manual page 324

VLT AutomationDrive FC 301/302
Programming Guide
Table 563: Parameter 9-70 Edit Set-up
9-70 Edit Set-up
Default value: [1] Set-up 1
Conversion index: –
Select the setup in which programming (change of data) is performed during operation. It is possible to program the 2 setups inde-
pendently of the setup selected as the active setup. Parameter access from each master is directed to the setup selected by the
individual master (cyclic, acyclic MCL1, 1
Option
[0]
[1]*
[2]
[3]
[4]
[9]
Parameter 9-71 PROFIBUS Save Data Values
Table 564: Parameter 9-71 PROFIBUS Save Data Values
9-71 PROFIBUS Save Data Values
Default value: [0] Off
Conversion index: –
Parameter values changed via RS485 are not automatically stored in a non-volatile memory. Use this parameter to activate a func-
tion that stores parameter values in the EEPROM non-volatile memory, so changed parameter values are retained at power-down.
Option
[0]*
[1]
[2]
Parameter 9-72 PROFIBUSDriveReset
Table 565: Parameter 9-72 PROFIBUSDriveReset
9-72 PROFIBUSDriveReset
Default value: [0] No action
Conversion index: –
Resets the VLT® PROFIBUS DP-V1 MCA 101 option only.
324 | Danfoss A/S © 2022.12
Parameter type: Option
Data type: Uint8
st nd
acyclic MCL2, 2 acyclic MCL2, 3
Name
Factory setup
Set-up 1
Set-up 2
Set-up 3
Set-up 4
Active set-up
Parameter type: Option
Data type: Uint8
Name
Off
Store all setups
Store all setups
Parameter type: Option
Data type: Uint8
N O T I C E
Setup: All setups
Change during operation: True
rd
acyclic MCL2).
Description
Setup: All setups
Change during operation: True
Description
Setup: 1 setup
Change during operation: False
AU275636650261en-000101 / 130R0334
Parameter Descriptions