Danfoss VLT AutomationDrive FC 301 Programming Manual page 486

VLT AutomationDrive FC 301/302
Programming Guide
4.
Click Read from drive.
Illustration 90: MCT 10, Read From Drive
The service log view in MCT 10 looks as shown in
time.
Illustration 91: Service Log View, 5 s
Use the zoom function to focus on the last 250 ms before the fault.
5.15.7 Alarms that Trigger a Service Log Record
Table 777: Alarms Triggering a Service Log Record
# Alarm title
4 Mains phase loss
5 DC voltage high
6 DC voltage low
7 DC overvolt
8 DC undervolt
9 Inverter overld.
10 Motor ETR over
12 Torque limit
486 | Danfoss A/S © 2022.12
Illustration 91. Use the cursor to view the detailed readings at a specific
Parameter Descriptions
AU275636650261en-000101 / 130R0334