Danfoss VLT AutomationDrive FC 301 Programming Manual page 337

VLT AutomationDrive FC 301/302
Programming Guide
Parameter 10-13 Warning Parameter
Table 588: Parameter 10-13 Warning Parameter
10-13 Warning Parameter
Default value: 0
Conversion index: 0
View a DeviceNet-specific warning word. One bit is assigned to every warning. Refer to the VLT® DeviceNet MCA 104 Installation
Guide for further information.
Table 589: Warning Bits
Bit Description
0 Bus not active
1 Explicit connection timeout
2 I/O connection
3 Retry limit reached
4 Actual is not updated
5 CAN bus off
6 I/O send error
7 Initialization error
8 No bus supply
9 Bus off
10 Error passive
11 Error warning
12 Duplicate MAC ID error
13 RX queue overrun
14 TX queue overrun
15 CAN overrun
Parameter 10-14 Net Reference
Table 590: Parameter 10-14 Net Reference
10-14 Net Reference
Default value: [0] Off
Conversion index: –
Select the reference source in instances 21/71 and 20/70.
Option
[0]*
[1]
Danfoss A/S © 2022.12
Parameter type: Range, 0 - 65535
Data type: Uint16
Parameter type: Option
Data type: Uint8
Name
Off
On
Setup: All setups
Change during operation: True
Setup: 2 setups
Change during operation: True
Description
AU275636650261en-000101 / 130R0334 | 337
Parameter Descriptions