Danfoss VLT AutomationDrive FC 301 Programming Manual page 413

VLT AutomationDrive FC 301/302
Programming Guide
Option Name
[226] Touch on target
[227] Touch activated
[228] Comparator 6
[229] Comparator 7
[230] Comparator 8
[231] Comparator 9
[232] Logic rule 6
[233] Logic rule 7
[234] Logic rule 8
[235] Logic rule 9
[236] SL time-out 8
[237] SL time-out 9
[238] RS flipflop 8
[239] RS flipflop 9
[240] SL digital output A
[241] SL digital output B
[242] SL digital output C
[243] SL digital output D
[244] SL digital output E
[245] SL digital output F
5.13.5 13-5* States
Parameter 13-51 SL Controller Event
Table 686: Parameter 13-51 SL Controller Event
13-51 SL Controller Event
Default value: Size related
Conversion index: -
Danfoss A/S © 2022.12
Description
This option is only available with software version 48.2X or newer.
Target position is reached in touch probe position mode.
Touch probe positioning is active. The drive monitors the touch probe sensor input.
Parameter type: Option, Array [20]
Data type: Uint8
N O T I C E
Setup: 2 setups
Change during operation: True
AU275636650261en-000101 / 130R0334 | 413
Parameter Descriptions