Danfoss VLT AutomationDrive FC 301 Programming Manual page 690

VLT AutomationDrive FC 301/302
Programming Guide
Bit 0
13 Voltage OK
14 Torque OK
15 Timer OK
Different from [0] FC Profile. Options for bits 5 and 12–15 in parameter 8-13 Configurable Status Word STW:
1
• [4] Position Error
• [5] Position Limit
• [6] Touch on Target
• [7] Touch Activated
• [8] Touch Sen. Found
•
[9] Vir. Master on Ref.
•
[22] Execution Distance Extended
•
[210] Pos. Set Acknowledge
690 | Danfoss A/S © 2022.12
Integrated Motion Controller
1
Voltage exceeded
Torque exceeded
Timer exceeded
AU275636650261en-000101 / 130R0334