Danfoss VLT AutomationDrive FC 301 Programming Manual page 135

VLT AutomationDrive FC 301/302
Programming Guide
Option Name
[3] 24V Encoder 32/33
[4] MCB 102
[5] MCB 103
[6] Virtual Master
[7] Frequency Input 29
[8] Frequency Input 33
[11] Local Bus Reference
[12] Preset Reference
[13] 24V Encoder 27/29
[14] MCB 102 Absolute
[15] MCO Encoder 1 X56
[16] MCO Encoder 2 X55
[20] Digital Potmeter
[21] Analog Input X30/11
[22] Analog Input X30/12
[29] Analog Input X48/2
[37] Analog Input X49/1
[38] Analog Input X49/3
[39] Analog Input X49/5
Parameter 3-19 Jog Speed [RPM]
Table 203: Parameter 3-19 Jog Speed [RPM]
3-19 Jog Speed [RPM]
Default value: Size related
Conversion index: 67
Enter a value for the jog speed n
The maximum limit is defined in parameter 4-13 Motor Speed High Limit [RPM]. See also parameter 3-80 Jog/Homing Ramp Time.
Danfoss A/S © 2022.12
Description
This option is only available in FC 302.
Reference from terminals 68 and 69.
Parameter type: Range, 0 - par. 4-13 RPM
Data type: Uint16
, which is a fixed output speed. The drive runs at this speed when the jog function is activated.
JOG
Parameter Descriptions
N O T I C E
Setup: All setups
Change during operation: True
AU275636650261en-000101 / 130R0334 | 135