Danfoss VLT AutomationDrive FC 301 Programming Manual page 349

Hide thumbs Also See for VLT AutomationDrive FC 301:
Table of Contents

Advertisement

VLT AutomationDrive FC 301/302
Programming Guide
A power cycle is necessary after setting the IP parameters manually.
This parameter is read-only. It shows the IP address of the found DHCP or BOOTP server.
Parameter 12-05 Lease Expires
Table 608: Parameter 12-05 Lease Expires
12-05 Lease Expires
Default value: Size related
Conversion index: 0
This parameter is read-only. It shows the lease time for the current DHCP-assigned IP address.
Parameter 12-06 Name Servers
Table 609: Parameter 12-06 Name Servers
12-06 Name Servers
Default value: 0
Conversion index: 0
IP addresses of the domain name servers. Can be automatically assigned when using DHCP.
Parameter 12-07 Domain Name
Table 610: Parameter 12-07 Domain Name
12-07 Domain Name
Default value: 0
Conversion index: 0
Domain name of the attached network. Can be automatically assigned when using DHCP network.
Parameter 12-08 Host Name
Table 611: Parameter 12-08 Host Name
12-08 Host Name
Default value: 0
Conversion index: 0
Logical (given) name of the option.
The display of the drive only shows the 1
switches are different from all ON or all OFF, the switches have priority.
Parameter 12-09 Physical Address
Table 612: Parameter 12-09 Physical Address
12-09 Physical Address
Default value: 0
Conversion index: 0
Danfoss A/S © 2022.12
N O T I C E
Parameter type: Range, Size related
Data type: TimeDifferenceWithDateIndication
Parameter type: Range, 0 -4294967295
Data type: OctetString
Parameter type: Range, 0 - 48
Data type: VisibleString
Parameter type: Range, 0 - 48
Data type: VisibleString
N O T I C E
st
19 characters, but the remaining characters are stored in the drive. If hardware
Parameter type: Range, 0 - 17
Data type: VisibleString
Parameter Descriptions
Setup: All setups
Change during operation: True
Setup: All setups
Change during operation: True
Setup: 1 setup
Change during operation: True
Setup: 1 setup
Change during operation: True
Setup: 1 setup
Change during operation: True
AU275636650261en-000101 / 130R0334 | 349

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vlt automationdrive fc 302

Table of Contents