Uart Lin Snap Shot (Uartlss) Register; Uart Lin Timer (Uartltim) Register; Uart Lin Snap Shot (Uartlss) Register Field Descriptions; Uart Lin Timer (Uartltim) Register Field Descriptions - Texas Instruments Concerto F28M36 Series Technical Reference Manual

Register Descriptions
21.7.16 UART LIN Snap Shot (UARTLSS), offset 0x094
The UARTLSS register captures the free-running timer value when either the Sync Edge 1 or the Sync
Edge 5 is detected in LIN mode.
31
Reserved
LEGEND: R/W = Read/Write; R = Read only; -n = value after reset
Table 21-18. UART LIN Snap Shot (UARTLSS) Register Field Descriptions
Bit Field
31-16 Reserved
15-0 TSS
21.7.17 UART LIN Timer (UARTLTIM), offset 0x098
The UARTLTIM register contains the current timer value for the free-running timer that is used to calculate
the baud rate when in LIN slave mode. The value in this register is used along with the value in the UART
LIN Snap Shot (UARTLSS) register to adjust the baud rate to match that of the master.
31
Reserved
LEGEND: R/W = Read/Write; R = Read only; -n = value after reset
Table 21-19. UART LIN Timer (UARTLTIM) Register Field Descriptions
Bit Field
31-16 Reserved
15-0 TIMER
1516
M3 Universal Asynchronous Receivers/Transmitters (UARTs)
Figure 21-23. UART LIN Snap Shot (UARTLSS) Register
R-0
Value Description
Reserved
Timer Snap Shot
This field contains the value of the free-running timer when either the Sync Edge 5 or the Sync
Edge 1 was detected.
Figure 21-24. UART LIN Timer (UARTLTIM) Register
R-0
Value Description
Reserved
Timer Value
This field contains the value of the free-running timer.
Copyright © 2012–2019, Texas Instruments Incorporated
16 15
16 15
SPRUHE8E – October 2012 – Revised November 2019
www.ti.com
TSS
R-0
TIMER
R-0
Submit Documentation Feedback
0
0