Interrupt 64-95 Clear Pending (Unpend2) Register; Interrupt 64-95 Clear Pending (Unpend2) Register Field Descriptions - Texas Instruments Concerto F28M36 Series Technical Reference Manual

NVIC Register Descriptions
25.5.18 Interrupt 64-95 Clear Pending (UNPEND2) Register, offset 0x288
The Interrupt 64-95 Clear Pending (UNPEND2) register shows which interrupts are pending and removes
the pending state from interrupts. Bit 0 corresponds to Interrupt 64; bit 31 corresponds to Interrupt 95. See
the Cortex-M3 Processor chapter for interrupt assignments.
Note: This register can only be accessed from privileged mode.
31
LEGEND: R/W = Read/Write; R = Read only; -n = value after reset
Table 25-28. Interrupt 64-95 Clear Pending (UNPEND2) Register Field Descriptions
Bit Field
31-0 INT
1658
Cortex-M3 Peripherals
Figure 25-22. Interrupt 64-95 Clear Pending (UNPEND2) Register
Value Description
Interrupt Clear Pending
0 On a read, indicates that the interrupt is not pending. On a write, no effect.
1 On a read, indicates that the interrupt is pending. On a write, clears the corresponding INT[n] bit in
the PEND2 register, so that interrupt [n] is no longer pending. Setting a bit does not affect the
active state of the corresponding interrupt
Copyright © 2012–2019, Texas Instruments Incorporated
INT
R/W-0
SPRUHE8E – October 2012 – Revised November 2019
www.ti.com
0
Submit Documentation Feedback