Software Trigger Interrupt (Swtrig) Register; Software Trigger Interrupt (Swtrig) Register Field Descriptions - Texas Instruments Concerto F28M36 Series Technical Reference Manual

NVIC Register Descriptions
When the MAINPEND bit in the Configuration and Control (CFGCTRL) register is set, unprivileged
software can access the SWTRIG register.
Note: Only privileged software can enable unprivileged access to the SWTRIG register.
31
LEGEND: R/W = Read/Write; R = Read only; -n = value after reset
Table 25-37. Software Trigger Interrupt (SWTRIG) Register Field Descriptions
Bit Field
31-6 Reserved
5-0 INTID
1664
Cortex-M3 Peripherals
Figure 25-31. Software Trigger Interrupt (SWTRIG) Register
Reserved
R-0
Value Description
Reserved
Interrupt ID
This field holds the interrupt ID of the required SGI. For example, a value of 0x3 generates an
interrupt on IRQ3.
Copyright © 2012–2019, Texas Instruments Incorporated
6 5
SPRUHE8E – October 2012 – Revised November 2019
Submit Documentation Feedback
www.ti.com
0
INTID
W0