5.6.5 Replacing the axis-5 motor
Location of the axis-5 motor
The axis-5 motor is located as shown in the figure.
xx2000001485
Required spare parts
Spare part
Motor unit, axis 5 and axis 6
Timing belt, axis 5
Process hub, basic
Process hub (CP/CS and air hose,
without Ethernet)
Process hub (CP/CS and air hose,
with Ethernet)
Process hub, basic, Clean Room
Product manual - IRB 1300
3HAC070390-001 Revision: G
Note
The spare part numbers that are listed in the table can be out of date. See the
latest spare parts of the IRB 1300 via myABB Business Portal,
www.abb.com/myABB.
© Copyright 2020-2022 ABB. All rights reserved.
5.6.5 Replacing the axis-5 motor
Article number
Note
3HAC073088-001
3HAC065794-001
3HAC073306-001
Used with protection classes IP40
and IP67.
Used with protection type
Foundry Plus.
3HAC073307-001
Used with protection classes IP40
and IP67.
Used with protection type
Foundry Plus.
3HAC073308-001
Used with protection classes IP40
and IP67.
Used with protection type
Foundry Plus.
3HAC077836-001
Used with protection type Clean
Room.
5 Repair
Continues on next page
545