ABB IRB 1300 Product Manual page 222

5 Repair
5.4.1 Replacing the base
Continued
7
Removing the axis-1 gearbox
1
2
3
4
Continues on next page
222
Action
Carefully lift out the motor.
Action
DANGER
Make sure that all supplies for electrical power,
hydraulic pressure, and air pressure are turned
off.
CAUTION
For robots with protection type Clean Room
Always cut the paint with a knife and grind the
paint edge when disassembling parts of the robot!
See Cut the paint or surface on the robot before
replacing parts on page 145.
CAUTION
Removing gearboxes will release axes. This
means the axes can fall down.
Make sure axes are well supported before remov-
ing gearboxes.
Remove the screws.
© Copyright 2020-2022 ABB. All rights reserved.
Note
xx2000001645
Note
xx2000001694
Product manual - IRB 1300
3HAC070390-001 Revision: G