ABB IRB 1300 Product Manual page 383

2
3
Refitting the extender unit
Use these procedures to refit the extender unit before refitting the housing.
Refitting the extender unit
1
2
Product manual - IRB 1300
3HAC070390-001 Revision: G
Action
CAUTION
For robots with protection type Clean Room
Always cut the paint with a knife and grind the
paint edge when disassembling parts of the robot!
See Cut the paint or surface on the robot before
replacing parts on page
Separate the extender unit from the tubular.
Note
Only IRB 1300-7/1.4 and IRB 1300-12/1.4 have an extender unit, connecting the
housing and tubular.
Action
For robots with protection type Clean Room:
Clean the joints that have been opened and wipe
the parts free from particles with spirit on a lint
free.
For robots with protection class IP67 (option
3350-670)
For robots with protection type Clean Room
(option 3351-4)
For robots with protection type Foundry Plus
(option 3352-10)
Check the O-ring.
Replace if damaged.
© Copyright 2020-2022 ABB. All rights reserved.
5.5.2 Replacing the housing and extender unit
145.
5 Repair
Continued
Note
xx2000001730
Note
O-ring on tubular: 3HAC061327-
018
xx2000002519
Continues on next page
383