ABB IRB 1300 Product Manual page 396

Hide thumbs Also See for IRB 1300:
Table of Contents

Advertisement

5 Repair
5.5.2 Replacing the housing and extender unit
Continued
3
Refitting the axis-3 timing belt
1
2
3
4
5
6
Continues on next page
396
Action
Refit the lower arm support.
Action
For robots with protection type Clean Room:
Clean the joints that have been opened and wipe
the parts free from particles with spirit on a lint
free.
Install the timing belt to the pulleys and verify that
the belt runs correctly in the grooves of the pul-
leys.
Move the motor to achieve proper belt tension.
Use a sonic tension meter to measure the timing
belt tension.
If the timing belt tension does not meet the require-
ment, loosen the motor screws and readjust.
Secure the motor with the screws.
Release the support to the upper arm.
© Copyright 2020-2022 ABB. All rights reserved.
Note
Screw: M8x40 12.9 Gleitmo
603+Geomet 500 (7 pcs)
Tightening torque: 39 Nm±3%
xx2000001663
Note
xx2000001615
Used belt: 73.4-78.5 Hz
New belt: 87.8-92.1 Hz
Tightening torque: 3.3 Nm
xx2000001614
Product manual - IRB 1300
3HAC070390-001 Revision: G

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents