ABB IRB 1300 Product Manual page 325

Refitting the axis-2 sealing rings
1
2
3
Product manual - IRB 1300
3HAC070390-001 Revision: G
Action
For robots with protection type Clean Room:
Clean the joints that have been opened and wipe
the parts free from particles with spirit on a lint
free.
For robots with protection class IP67 (option
3350-670)
For robots with protection type Clean Room
(option 3351-4)
Check the O-ring on the swing support side.
For robots with protection type Foundry Plus
(option 3352-10)
Check the O-rings on both swing and swing sup-
port sides.
For robots with protection class IP67 (option
3350-670)
For robots with protection type Foundry Plus
(option 3352-10)
Refit the sealing ring on the swing side.
© Copyright 2020-2022 ABB. All rights reserved.
5 Repair
5.5.1 Replacing the lower arm
Continued
Note
O-ring on lower arm: 3HAC061327-
015
For robots with protection class
IP67 (option 3350-670)
For robots with protection type
Clean Room (option 3351-4)
For robots with protection type
Foundry Plus (option 3352-10)
xx2000002518
For robots with protection type
Foundry Plus (option 3352-10)
xx2000002517
Sealing ring, swing side:
3HAC065675-001
Screw: M4x12 12.9 Lafre
2C2B/FC6.9 (8 pcs)
Tightening torque: 3.8 Nm
xx2000002516
Continues on next page
325