ABB IRB 1300 Product Manual page 273

6
7
Securing the cable package in the swing
1
2
Product manual - IRB 1300
3HAC070390-001 Revision: G
Action
Refit the swing support.
Apply grease to the axis-2 cable protector and
slip it over the cable harness.
Action
For robots with protection type Clean Room:
Clean the joints that have been opened and wipe
the parts free from particles with spirit on a lint
free.
Route the cable package up into the lower arm.
Make sure that the the air hoses are facing outside
in the axis-2 cable protector, see the figure as a
guidance for the cable twisting way.
© Copyright 2020-2022 ABB. All rights reserved.
5 Repair
5.4.2 Replacing the swing
Continued
Note
Screw: M8x40 12.9 Gleitmo
603+Geomet 500 (7 pcs)
Tightening torque: 36 Nm
xx2000001684
Grease: 3HAC029132-001
Plastic cable protector, axis 2:
3HAC067816-001
xx2000001567
Note
xx2000001746
Continues on next page
273