Switching Hysteresis - Lenze L-force HighLine C 8400 Series Reference Manual

16.1.163.3 Switching hysteresis

Setting a hysteresis in
switching output that may be caused by actual position value changes due to a mechanical
irregularity at the axis.
CenterMode = FALSE
dnSwitchPoint1_p
bOut1
C01063/1: Hysteresis
[16-65] Switching hysteresis

Tip!
Please note that a delay time set in
the hysteresis.
Firmware ≤ 11.00 - DMS 6.0 EN - 10/2011
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
C01063/x serves to prevent a permanent state change of the bOut
dn2ndPoint_Size1_p
Œ Œ
L
8400 HighLine C | Reference manual
Function blocks | L_SwitchPoint_1
CenterMode = TRUE
dnSwitchPoint1_p
dn2ndPoint_Size1_p
bOut1
Œ
C01062/x shifts the switching points including
Function library
Œ
1321