Suzuki Baleno Manual page 1166

9J-66 AIR BAG SYSTEM
ALWAYS PLACE AIR BAG (INFLATOR) MODULE
ON WORKBENCH WITH TRIM COVER (AIR BAG
OPENING) UP, AWAY FROM LOOSE OBJECTS.
1. Slit on workbench
2. Workbench vise
3. Lower mounting bracket
WARNING:
When placing a live air bag (inflator) module on bench or
other surface, always face the bag up, away from the sur-
face. As the live passenger air bag (inflator) module must
be placed with its bag (trim cover) facing up, place it on
the workbench with a slit or use the workbench vise to
hold it securely at its lower mounting bracket.
It is also prohibited to place anything on top of the trim
cover and stack air bag (inflator) modules.
This is necessary so that a free space is provided to allow
the air bag to expand in the unlikely event of accidental
deployment.
Otherwise, personal injury may result.
LIVE (INACTIVATED) SEAT BELT PRETENSIONERS
NOTE:
Whether the pretensioner has activated or not can be judged
by the warning label attached on retractor assembly. If it has
been torn by generated gas, the pretensioner has activated.
1. Activated pretensioner
(retractor assembly)
2. Warning label
3. Exhaust hole
Special care is necessary when handling and storing live (inacti-
vated) seat belt pretensioners.
Also, when the seat belt pretensioners activate, gas is generated
and the seat belt is retracted into the retractor quickly.
Note, therefore, that if they activate accidentally, the seat belt pre-
tensioners and other object(s) around them may be thrown through
the air.
WARNING:
Never attempt to measure the resistance of the seat belt
pretensioners. It is very dangerous as the electric cur-
rent from the tester may activate pretensioner.