Suzuki Baleno Manual page 1195

1. Activated seat belt pretensioner
2. Gloves
18) In the unlikely event that the seat belt pretensioner did not acti-
vate after the following these procedures, proceed immediate-
ly with Steps 23) through 26). If the the seat belt pretensioner
did activate, proceed with Steps 19) through 22).
19) Put on a pair of shop gloves to protect your hands from pos-
sible irritation and heat when handling the activated seat belt
pretensioner.
NOTE:
As a precaution, gloves and safety glasses are recom-
mended to prevent any possible irritation of the skin or
eyes.
20) Disconnect the deployment harness from the seat belt preten-
sioner as soon after activation as possible. This will prevent
damage to the deployment harness due to possible contact
with the hot seat belt pretensioner canister. The deployment
harness are designed to be reused. They should, however, be
inspected for damage after each activation and replaced if
necessary.
21) Dispose of the activated seat belt pretensioner through normal
refuse channels after it has cooled for at least 30 minutes and
tightly seal the seat belt pretensioner in a strong vinyl bag. (Re-
fer to "ACTIVATED SEAT BELT PRETENSIONERS DIS-
POSAL" in this section.)
22) Wash your hands with mild soap and water afterward.
AIR BAG SYSTEM 9J-95