Suzuki Baleno Manual page 1179

i) Connect connector.
ii) Lock connector with lock lever.
1. Seat belt pretensioner connector
Check retractor assembly with seat belt pretensioner appearance
visually for the following symptoms and if any one of them is appli-
cable, replace it with a new one as an assembly.
D Seat belt pretensioner has activated.
D There is a crack in seat belt pretensioner (retractor assembly).
D Wire harness or connector is damaged.
D Seat belt pretensioner (retractor assembly) is damaged or a
strong impact (e.g., dropping) was applied to it.
INSTALLATION
1) Install front seat belts to the vehicle in the same way as when
installing them without pretensioner described on "SEAT BELT"
in Section 9.
2) Connect Yellow connector for seat belt pretensioner securely
and fit seat belt pretensioner connector onto body.
3) Connect negative battery cable to battery.
4) Enable air bag system. Refer to "ENABLING AIR BAG SYS-
TEM" in this section.
AIR BAG SYSTEM 9J-79