Suzuki Baleno Manual page 1163

i) Release locking of lock lever.
ii) After unlocked. disconnect to connector.
1. Junction box (J/B)
3. Yellow connector of driver air bag (inflator) module
4. Yellow connector of passenger air bag (inflator) module
5. Connector stay
i) Connect connector.
ii) Lock connector with lock lever.
1. J/B
2. Yellow connector of driver air bag (inflator) module
3. Connector stay
DISABLING AIR BAG SYSTEM
1) Turn steering wheel so that vehicle's wheels (front tires) and
pointing straight ahead.
2) Turn ignition switch to "LOCK" position and remove key.
3) Remove "AIR BAG" fuse from junction box (J/B).
4) Remove steering wheel side cap (left side) and disconnect Yel-
low connector of driver air bag (inflator) module.
5) Pull out glove box while pushing its stopper from both right and
left sides and disconnect Yellow connector of passenger air bag
(inflator) module.
NOTE:
With "AIR BAG" fuse removed and ignition switch ON, "AIR
BAG" warning lamp will be ON.
This is normal operation and does not indicate a air bag
system malfunction.
ENABLING AIR BAG SYSTEM
1) Turn ignition switch to "LOCK" and remove key.
2) Connect Yellow connector of driver air bag (inflator) module,
and be sure to lock connector with lock lever.
Fit driver air bag (inflator) module connector onto connector
stay.
AIR BAG SYSTEM 9J-63