SSANGYONG Rexton Y200 Manual page 44

SSANGYONG Y200
M162 ENGINE MECHANICAL 1B1-3
Removal & Installation Procedure
1. Disconnect the negative terminal of battery.
2. Remove the hood.
3. Remove the under cover.
Installation Notice
Tightening Torque
YAD1B020
4. Disconnect the Hot Film Air Mass (HFM) sensor
connector.
5. Disconnect the HFM sensor from the air filter
housing.
6. Remove the intake air duct mounting nuts.
Installation Notice
Tightening Torque
KAA1C010
7. Remove the air cleaner cover. Remove the
mounting bolts and air cleaner housing and
element assembly.
YAD1B030
8. Loosen the radiator drain cock and drain the
coolant.
Notice: Open the coolant reservoir cap.
YAD1B040
28 - 47 N•m
(21 - 35 lb-ft)
9 - 11 N•m
(80 - 97 lb-in)