SSANGYONG Rexton Y200 Manual page 25

Tools Required
001 589 76 21 00 Compression Pressure Tester
119 589 01 09 00 Spark Plug Wrench
Measuring Procedure
1. Warm the engine up to normal operating
temperature.
2. Remove the spark plugs using the spark plug
wrench 119 589 01 09 00.
3. Place the diagram sheet to compression pressure
tester 001 589 76 21 00.
4. Connect the adaptor to compression pressure
tester 001 589 76 21 00 and install it into the spark
plug hole.
SSANGYONG Y200
ENGINE GENERAL INFORMATION 1A-11
5. Crank the engine approx. eight revolutions by
using the start motor.
6. Compare the measurements of compression
pressure tester 001 589 76 21 00 with the
specifications.
7. Measure the compression pressure of the other
cylinders in the same way.
8. If measured value is not within the specifications,
perform the cylinder pressure leakage test.
Notice:
•
Discharge the combustion residues in the
cylinders before testing the compression
pressure.
•
Apply the parking brake before cranking the
engine.