SSANGYONG Rexton Y200 Manual page 49

1B1-8 M162 ENGINE MECHANICAL
28. Remove the service hole cover in the engine block.
29. Put the alignment mark for installation, and remove
the six mounting bolts for torque converter from
drive plate through the service hole by rotating the
engine and remove the torque converter.
Installation Notice
Tightening Torque
•
Screw the six bolts mounting the torque
converter through the service hole by using a
mirror and rotating the engine.
KAA5A2N0
30. Remove the exhaust manifold and exhaust pipe.
Installation Notice
Tightening Torque
YAD1B180
31. Remove the transmission mounting bolts and
separate the transmission from the engine.
Installation Notice
Tightening Torque
YAD1B190
32. Install a chain to the bracket of engine, by using
a hoist or crane.
33. Remove the engine mounting bracket nuts.
Installation Notice
Tightening Torque
YAD1B200
42 N•m (31 lb-ft)
30 N•m (22 lb-ft)
54 - 68 N•m
(40 - 50 lb-ft)
Upper : 70 N•m (52 lb-ft)
Lower : 38 N•m (28 lb-ft)
SSANGYONG Y200