Toyota Tundra 2005 Service - Repair - Maintenance page 2325

AUTOMATIC TRANSMISSION (A750E, A750F) − PARKING LOCK PAWL
PARKING LOCK PAWL
ON−VEHICLE REPAIR
1. REMOVE VALVE BODY (See page AT−12)
2. REMOVE PARKING LOCK PAWL BRACKET
Remove the 3 bolts and parking lock pawl bracket.
D12708
3. REMOVE PARKING LOCK ROD
D12709
4. REMOVE SPRING FROM PARKING LOCK PAWL
SHAFT
5. REMOVE PARKING LOCK PAWL AND SHAFT
6. INSTALL PARKING LOCK PAWL AND SHAFT
7. INSTALL SPRING TO PARKING LOCK PAWL SHAFT
D12710
8. INSTALL PARKING LOCK PAWL BRACKET
Install the parking lock pawl bracket with the 3 bolts.
HINT:
S
Push the lock rod fully forward.
S
Check that the parking lock pawl operates smoothly.
Torque: 7.4 N·m (75 kgf·cm, 65 in.·lbf)
9. INSTALL VALVE BODY (See page AT−12)
D12708
AT−15
AT13Q−01