HP ProCurve 7102dl Reference Manual page 999

SROS Command Line Interface Reference Guide
hold-queue <queue size> out
Use the hold-queue command to change the overall size of an interface's WAN output queue. Use the no
form of this command to return to the default setting.
Syntax Description
<queue size>
Default Values
The default queue size for WFQ is 400. The default queue size for PPP FIFO and Frame Relay
round-robin is 200.
Usage Examples
The following example sets the overall output queue size to 700:
ProCurve(config)#interface hdlc 1
ProCurve(config-hdlc 1)#hold-queue 700
5991-2114
The total number of packets the output queue can contain before packets are
dropped. Valid range is 16-1000.
© Copyright 2007 Hewlett-Packard Development Company, L.P.
HDLC Command Set
997