Protocol Inbound - HP MSR Series Command Reference Manual

none: Disables parity check.
odd: Performs odd parity check.
space: Performs space parity check.
Usage guidelines
This command is not supported in VTY line view.
The configuration terminal and the device must be configured with the same parity check mode to
communicate.
Examples
# Configure user line AUX 0 to perform odd parity check.
<Sysname> system-view
[Sysname] line aux 0
[Sysname-line-aux0] parity odd

protocol inbound

Use protocol inbound to enable a user line to support Telnet, PAD, SSH, or all three protocols.
Use undo protocol inbound to restore the default.
Syntax
In non-FIPS mode:
protocol inbound { all | pad | ssh | telnet }
undo protocol inbound
In FIPS mode:
protocol inbound ssh
undo protocol inbound
Default
In non-FIPS mode, all three protocols are supported.
In FIPS mode, SSH is supported.
Views
VTY line view, VTY line class view
Predefined user roles
network-admin
Parameters
all: Supports all three protocols.
pad: Supports PAD only.
ssh: Supports SSH only.
telnet: Supports Telnet only.
66