NEC Univerge sv8500 Manual page 380

Hide thumbs Also See for Univerge sv8500:

Table of Contents

Data Assignment by PCPro

This section explains the data assignment procedures to the Telephony Server by PCPro.

[1] Internal PHE Data Assignment

8LC Card is controlled by SP-PHI which is embedded in, and controlled by MPH. For the use of MPH, it

is required to make Internal PHE function valid. So Internal PHE data assignment is necessary. About the

procedure for the Internal PHE data assignment, refer to Vol.1, Chapter 2, "2. IP Related Basic Program-

ming" in this manual. The explanation of PHs including Internal PHE is also there.

[2] SP-PHI Data Assignment

8LC Card is controlled by SP-PHI. So SP-PHI data assignment is necessary. About the procedure for the

SP-PHI data assignment, refer to Vol.1, Chapter 2, "2. IP Related Basic Programming" in this manual. The

explanation of PHs including SP-PHI is also there.

[3] 8LC Card Data Assignment

ASYDL: Assignment of System Data (LDM)

SYS1, INDEX 811: Tone Code by countries. See Command Manual for more details.

ANPD: Assignment of Numbering Plan

Assign the Access Code (ACC) for station access, by using the combination of ANPD and ASPA com-

1st DC of the station numbers

Total station number digits

ASPA: Assignment of Special Access Code

Enter the Access Code using the 1st DC specified by the ANPD command.

Assign "STN: Station Number" for Kind of Service.

AISTL: Assignment of IP Station Data (LDM)

Assign the IP Station Data of each analog terminal connected to 8LC Card.

Tenant Number [1-63]

Station Number of IP Station (assign the station number for each analog terminal connected to

Kind of IP Terminal. Select the terminal kind "8MC (SIP)" in the combo box

Telephone Equipment Class [2, 3, 4]

Route Restriction Class [0-15]

Service Feature Restriction Class [0-15]

Allocate IP station to Virtual LENS within Virtual PIR.

MAC address of 8LC Card

8LC Card [SCA-8LCA/SCA-8LCA-EMEA/SCA-8LCC/SCA-8LCC-EMEA]

Show Quick Links

Table of Contents