8Lc Card Cable Connection Diagram (Front) - NEC Univerge sv8500 Manual

5.2.2 Cable Connection
This section shows the cable connection to the 8LC Card. 8LC Card provides the following interfaces:
• Connection to the LAN
• Connection of Analog Telephone/G3 Fax Machine
• Serial Port Connection to Maintenance Console
• Power Supply
Connect the required cables according to the system configuration. The figure below shows general description
of cable connection for 8LC Card.
10BASE-T/100BASE-TX
connected to LAN
Note 1
8LC Card [SCA-8LCA/SCA-8LCA-EMEA/SCA-8LCC/SCA-8LCC-EMEA]

8LC Card Cable Connection Diagram (Front)

FRONT
MC0 MC2
MC1 MC3
OPERATION
100M LINK
ON
MC0 MC2 MC4 MC6
PWR ALM LINE
Ether
MC1 MC3 MC5 MC7
FAX
Analog Telephone
VOL.2-123
Maintenance Console (PC) :
used for configuration data setting
RS-232C
(D-sub 9-pin)
CONSOLE cable (option)
(serial straight-through cable)
RJ-45 serial
MC4 MC6
MC5 MC7
CONSOLE
RESET
MC8