Ac Power Cable Connection - NEC Univerge sv8500 Manual

AC power cable connection

STEP 1
Connect AC power cable to AC Power Inlet on the rear panel of 8LC Card. Fix the AC power cable
with the stopper.
Connect the other end of the power cable to appropriate AC supply.
For the safety measures against static electricity, lightning strike, and other electrical surges, be sure to
Note:
make proper connection to grounding (less than 10
AC power unit without Ground connection.
8LC Card [SCA-8LCA/SCA-8LCA-EMEA/SCA-8LCC/SCA-8LCC-EMEA]
REAR
AC power cable stopper
VOL.2-124
PACT
connected to AC Power supply
Ω
). Lightning might cause damage to 8LC Card and