Delta ASDA-A3 Series User Manual page 1209

Troubleshooting
AL249 PR path number is out of range
Trigger condition
and cause
14
Checking method
and corrective action
How to clear the
alarm?
AL251 Second development platform - the argument of the MATH_POWER command is out
Trigger condition
and cause
Checking method
and corrective action
How to clear the
alarm?
AL255 Second development platform - the system object ID is out of range when the object is
Trigger condition
and cause
Checking method
and corrective action
How to clear the
alarm?
AL257 Second development platform - the system object function block ID is out of range
Trigger condition
and cause
14-62
Condition: the number of the triggered PR path exceeds the upper limit.
Cause: the number of the triggered PR path exceeds 99.
1. Check if the PR command jumps to a path exceeding the range.
2. Check if the PR command format is correct.
DI.ARST or cycle power on the servo drive.
of range
Condition: when the MATH_POWER command is used, the argument is not within
the range of 0 - 10.
Cause: incorrect use of the command of the second development platform.
Refer to the command descriptions for the second development platform to ensure
the correct use of the commands. If you took the corrective action but the issue
persists, contact the local distributor or technician.
DI.ARST
used
Condition: when the system object is used, the object ID is out of range.
Cause:
Incorrect use of the command of the second development platform.
1.
The EzASD software version and the firmware version do not match.
2.
Refer to the command descriptions for the second development platform to
1.
ensure the correct use of the commands.
Check if you are using the latest version of the EzASD software.
2.
If you took the corrective actions but the issue persists, contact the local distributor
or technician.
DI.ARST
when the object is used
Condition: when the system object is used, the object function block ID is out of
range.
Cause:
Incorrect use of the command of the second development platform.
1.
The EzASD software version and the firmware version do not match.
2.
ASDA-A3