Set Up A Signaling Group And Digital Trunk Group; Instructions - Avaya G150 Installation And Configuration Manual

Set up a signaling group and digital trunk group

Note:
Important: You will only need to administer an H.323 signaling group or trunk
Note:
group between the G150 Media Gateway and the media server if the trunks to
your central office are terminated at the G150 Media Gateway. If you are using
the G150 Media Gateway solely for analog station connectivity, then you will not
need an H.323 trunk or signaling group between the G150 Media Gateway and
the media server.
Each G150 Media Gateway has its own listening port and signaling group for the digital trunks
(T1 or BRI). Set up a new signaling group and trunk group administered for H.323 signaling.

Instructions

Setting up a signaling group
Set up the signaling group for remote office:
1. Type add signaling-group <signaling group number or next> and press ENTER to
display the Signaling Group screen.
Set up a signaling group and digital trunk group
Issue 1 June 2005 71