Ipv6 Bgp Commands; Clear Ip Bgp Ipv6 Unicast Soft - Dell S4810 Reference Manual

Version
8.3.19.0
Version 8.3.7.0
Version 7.8.1.0
Version 7.7.1.0
Version 7.6.1.0
Example
Dell#show ip extcommunity-list test
ip extcommunity-list test
Dell#

IPv6 BGP Commands

IPv6 border gateway protocol (IPv6 BGP) is supported on the S4810 platform.
BGP is an external gateway protocol that transmits interdomain routing information within and between
Autonomous Systems (AS). Basically, two routers (called neighbors or peers) exchange information
including full routing tables and periodically send messages to update those routing tables.

clear ip bgp ipv6 unicast soft

Clear and reapply policies for IPv6 unicast routes without resetting the TCP connection; that is, perform
BGP soft reconfiguration.
S4810
Syntax
clear ip bgp {* | as-number | ipv4-neighbor-addr | ipv6-
neighbor-addr | peer-group name} ipv6 unicast soft [in | out]
Parameters
*
as-number
ipv4-neighbor-
addr | ipv6-
neighbor-addr
peer-group
name
ipv6 unicast
Border Gateway Protocol
Introduced on the S4820T.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
deny RT:1234:12
permit regexp 123
deny regexp 234
deny regexp 123
Clear and reapply policies for all BGP sessions.
Clear and reapply policies for all neighbors belonging to the
AS. The range is from 0 to 65535 (2 Byte), from 1 to
4294967295 (4 Byte), or from 0.1 to 0.65535.65535 (Dotted
format).
Clear and reapply policies for a neighbor.
Clear and reapply policies for all BGP routers in the specified
peer group.
Clear and reapply policies for all IPv6 unicast routes.
491