Cam-Acl-Vlan - Dell MXL 10GbE Reference Manual

Field
VlanAclOpt
Example
Dell#show cam-acl-vlan
-- Chassis Vlan Cam ACL --
VlanOpenFlow :
VlanIscsi
VlanHp
VlanFcoe
VlanAclOpt :
-- Stack unit 0 --
VlanOpenFlow :
VlanIscsi
VlanHp
VlanFcoe
VlanAclOpt :

cam-acl-vlan

Allocate the number of flow processor (FP) blocks or entries for VLAN services and processes.
Syntax
cam-acl-vlan { default | vlanopenflow <0-2> | vlaniscsi <0-2> |
vlanaclopt <0-2>
Parameters
default
vlanopenflow
<0-2>
vlaniscsi <0-2>
vlanaclopt
<0-2>
Default If you use the default keyword with the cam-acl-vlan command, the FP blocks
allocated for VLAN processes are restored to their default values. No FP blocks or
dynamic VLAN Content Aware Processor (VCAP) groups are allocated for VLAN
operations by default.
Command CONFIGURATION
Modes
290
Current Settings(in block sizes)
0
: 2
: 1
: 1
0
Current Settings(in block sizes)
0
: 2
: 1
: 1
0
Reset the number of FP blocks to default. By default, 0
groups are allocated for the ACL in VCAP. ACL VLAN groups
or CAM optimization is not enabled by default, and you need
to allocate the slices for CAM optimization.
Allocate the number of FP blocks for VLAN open flow
operations.
Allocate the number of FP blocks for VLAN iSCSI counters.
Allocate the number of FP blocks for the ACL VLAN
optimization feature.
Access Control List (ACL) VLAN Groups and Content Addressable Memory (CAM)
Description
Number of FP blocks for ACL VLAN
optimzation feature.