Show Fan - Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual

Chassis Management and Monitoring Commands

show fan

Displays the current operating status of chassis fans.
show fan [number]
Syntax Definitions
number
Defaults
N/A
Platforms Supported
OmniSwitch 6250
Usage Guidelines
This parameter specifies the switch (slot) number of the chassis. If no switch number is specified, then all
the switches in a stack will be displayed.
Examples
-> show fan
Chassis Fan Status
-------+---+-----------
1 1 Running
1 2 Running
1 3 Running
1 4 Not Running
1 5 Not Running
1 6 Not Running
2 1 Running
2 2 Running
2 3 Running
2 4 Not Running
2 5 Not Running
2 6 Not Running
3 1 Running
3 2 Running
3 3 Running
3 4 Not Running
3 5 Not Running
3 6 Not Running
output definitions
Chassis
Fan
Status
OmniSwitch 6250 CLI Reference Guide
Specifies the switch (slot) number of the chassis.
The number of the switch in a stack.
The fan number describing the fan position.
The current operational status of the corresponding fan.
November 2009 page 2-49