Static-Bind Ip-Address - 3Com 7750 Series Command Reference Manual

3Com Switch 7750 Series
Command Reference Guide – DHCP
Description
Use the reset dhcp server statistics command to clear the statistics on a DHCP
server, such as the number of DHCP unrecognized packets/request packets/response
packets.
Related command: display dhcp server statistics.
Example
# Clear the statistics on a DHCP server.
<3Com> reset dhcp server statistics

1.1.32 static-bind ip-address

Syntax
static-bind ip-address ip-address [mask mask ]
undo static-bind ip-address
View
DHCP address pool view
Parameter
ip-address: IP address to be bound. If you do not specify the mask-length or mask
argument, the default subnet mask is used.
mask mask: Subnet mask of the specified IP address. If you do not specify the
mask-length or mask argument, the default subnet mask is used.
Description
Use the static-bind ip-address command to specify an IP address which will be
bound statically to a MAC address.
Use the undo static-bind ip-address command to remove a statically bound IP
address.
By default, no IP address is statically bound.
Note that:
The static-bind ip-address command must be used together with the
static-bind mac-address command, to specify a statically bound IP address or
MAC address.
If you execute the static-bind ip-address command repeatedly, the new
configuration overwrites the previous one.
Related command: dhcp server ip-pool and static-bind mac-address.
Chapter 1 DHCP Server Configuration Commands
1-31