Display Static and
NNI Addresses at Port
Display the static addresses (which are the manually entered ATM
addresses) and NNI addresses at a specific port or at all ports.
Command Actions
Enter the menu sequence: (3) CON: Connections
Enter a parameter at the prompt
Parameter
Port number
Direct access sequence:
Command Result
System action taken:
Display ATM Addresses
(1) ADD: Get ATM addresses
(2) STC: Get static and NNI addresses
at port
Format or Range
<slot.group.port> or 0.0 for all
3 1 2 [parameters]
The information for the specified port(s) is displayed.
155