Checking and adjusting
Tripod
Connection of individual
elements must always be tight.
1. Tighten the Allen screws (2)
2. Tighten the articulated joints
NA2/NAK2-2.0.0en
Find Quality Products Online at:
1
2
moderately (if available).
on the tripod head (1) just
enough to keep the tripod
legs open when you lift it off
the ground.
GlobalTestSupply
www.
Circular level
∆
3.
1.
2.
1. Level up instrument.
2. Turn instrument by 180°.
3. If bubble of level is outside
the circle then it should be
adjusted (see point 4).
20
∆/2
4. Correct the half error using
an adjusting pin and repeat
steps 2 and 3 until the bubble
of level is in the centre in any
telescope direction.
Checking and adjusting
.com
sales@GlobalTestSupply.com