Viewing And Checking Settings - Leica RANGEMASTER CRF 1000-R Instructions Manual

Settings
When the device is turned on: Wait until the display
disappears. When the device is not turned on:
Start with step 1.
1. Press and hold the secondary button (1) (≥3s).
• The display shows
USEU
2. Press the secondary button briefly (<2s) one times.
• The display changes.
3. Press the main button (2) several times to select the
required setting (
EHr ON
4. Save your setting by briefly pressing the secondary
button.
• The saved setting is lit continuously for 4s as
confirmation and then disappears.
.
/ ).
OFF

VieWing and checking SeTTingS

If you want to check your settings, you can display the
values at any time.
To do this, briefly press the secondary button (2) twice.
• Below the reticle (or instead of the range), the following
will appear in turn for around 2s each:
- the set unit system (
- (if the function is enabled)
EHr
28
or )
EU US