Atf Cooler Hose Replacement - Honda 2004 Odyssey Service Manual

Automatic Transmission
ATF Cooler Flushing (cont'd)
17. Make sure the transmission is in the P position.
Fill the transmission with ATF, and run the engine
for 30 seconds or until approximately 0.95
(1.0 US qt) is discharged.
18. Remove the drain hose, and reconnect the cooler
return hose to the transmission.
19. Refill the transmission with ATF to the proper level
(see step 5 on page 14-137).
14-156 14-156

ATF Cooler Hose Replacement

1. Connect the cooler hoses (A) to the lines (B) and the
ATF cooler, and secure them with the clips (C).
A
A
2 4 mm
C
(0.1 0.2 in.)
2. Clamp the ATF cooler hose with the yellow mark
(D) on the clamp (E).
E
D
B
B
2 8 mm
C (0.2 0.3 in.)