5B-28 MANUAL TRANSMISSION
22. Remove the input shaft from the case by rotating
it until the flat surface appears.
23. Remove the following parts from the input shaft.
•
4th speed gear blocking ring.
•
Main shaft thrust race and bearing.
•
Main shaft pilot bearing rollers (15 rollers).
Notice: Be careful not to dissipate the pilot
bearing rollers.
YAD5B630
24. Remove the main shaft in 2 steps.
•
To remove the rear bearing outer race, push the
main shaft rearward.
YAD5B640
•
Tilt and lift the main shaft from the case.
YAD5B650
25. Remove the reverse fork and spring from the case.
YAD5B660
SSANGYONG Y200