SSANGYONG Rexton Y200 Manual page 1134

5B-48 MANUAL TRANSMISSION
11. Take apart the three synchronizer assemblies and
check :
•
The 1-2 synchronizer.
YAD5B1N0
•
The 5th blocking ring.
YAD5B1P0
12. Check the fit between the hub and sleeve of each
synchronizer
•
Excessively tight or loose hub-to-sleeve fit.
•
Wear of the cone clutch surfaces of brass
blocking rings and gears.
YAD5B1Q0
13. Measure the clearance between the blocking ring
and the speed gear
•
New 1-2 blocking ring : 0.87 - 1.4mm
•
New 3-4 blocking ring : 0.88 - 1.5mm
Notice: Excessive wear of the blocking ring or the
speed gear cone surface will cause shift block-
out gear clash.
YAD5B1R0
SSANGYONG Y200